22
LISTENING TO MONITOR MEMORIES
Once you have stored frequencies into monitor memories using a direct
or limit search, you can listen to the monitor memories by pressing
MAN-
UAL
,
MONITOR
, and then the number for the monitor memory you want
to listen to.
MOVING A FREQUENCY FROM A MONITOR
MEMORY TO A CHANNEL
Follow these steps to move a frequency stored in a monitor memory to
a permanent channel.
1. Press
MANUAL
.
2. Enter the number for the channel where you want to store the
monitor frequency. The channel number appears.
3. Press
PROGRAM
.
4. Press
MONITOR
and the number of the monitor memory number
that has the frequency you want to store. The channel number
starts flashing.
5. Press
WX/E
. The scanner stores the frequency in the selected
channel, and the channel number stops flashing.
20-509.fm Page 22 Wednesday, August 4, 1999 1:58 PM
