130 Section 2I: Using Ready Link
Making a Ready Link Call (One-to-One Call)
You can place a one-to-one Ready Link call by entering a Ready Link number
or by selecting a contact from the Ready Link List.
To place a Ready Link call by selecting a contact:
1. Press .
2. Select Go to(left softkey), and then select the list from which you
want to place a call (Personal List,R-LinkOutgoing,
R-LinkIncoming,or R-LinkMissed.), and press .
3. Scroll to the contact you want to call, and press and hold to
place the call and get the floor. (You will see “R-Link calling...” and
“Connecting...” followed by “You have floor.” You can now begin
speaking.)
– or –
Scroll to the contact you want to call and press and release to
place the call. (The call will connect as described above, but “Floor is
open” will be displayed on the screen. Either you or your contact may
press and hold to take the floor and speak.)
4. Continue holding as you speak. (When you have finished
speaking, release to allow the other party to speak. When the
other party takes the floor, you will see the speaker’s name, phone
number, and the text “has floor.”)
5. When you are finished, press .
Note:
During a Ready Link call, the “floor” is the right to speak. When you see
“Floor is open,” the first person to press the Ready Link/Voice Memo key
can speak (while holding the key). Only the person who has the floor can
speak. The phone beeps if you press the Ready Link/Voice Memo key
when another contact has the floor.
Tip:
You can also select Enter R-Link# from the Go to option to enter a
Ready Link number directly. (See page 132 for details.)
