INSTALLING THE IPOWER 70 ROOM CAMERA
4
Before Installing
Warning
Before you begin this procedure, make sure you turn off
your collaboration system’s power switch.
To install this camera, you will need:
❑ The 8-pin camera cable (labeled with the icon on both
cable collars) that came with your collaboration system, the
WorldCart™, or the Premier Cart. (A camera cable is not
supplied with this camera.)
❑ One of the following systems:
• iPower 900 system, software version 1.0 or higher
• Concorde•4500™ system, software version 6.50 or higher
• Venue•2000™ system, software version 1.3.50 or higher
❑ A pencil
❑ A flashlight (optional)
a
