A SERVICE OF

logo

The RADIUS Server configuration table includes the following fields: Table 4-22 Description of the 802.1X Configuration.
Item
Description
Mode
To Enable/Disable the port access control administrative mode
This selector lists the two options for administrative mode: enable and disable.
The default value is disabled..
RADIUS Server IP
The IP address of the RADIUS server being added.
RADIUS UDP Port
The UDP port used by this server. The valid range is 0 - 65535.
The default UDP Port No. is 1812
RADIUS Secret
Indicates if the shared secret for this server has been configured.
Table 4-22 Description of the 802.1X Configuration
Setup the RADIUS server and assign the client IP address to the Web-Smart switch. In this case, field in the default IP
Address of the Web-Smart switch with 192.168.0.100. And also make sure the shared secret key is as same as the one
you had set at the switch RADIUS server – 12345678 at this case.
Figure 4-44 RADIUS Server configuration
-55-