- 47 -
4.11.1 Switch Configuration
Choose Switch Configuration from Misc Operation of Web Smart PoE Switch( please see the Figure 4-58) , the screen in
Figure 4-59 appears and table 4-7 describes the Switch Configuration objects from Misc Operation of Web Smart PoE
Switch.
Figure 4-59 Switch Configuration Web Page screen
bject Description
Broadcast
Storm Filter
Provide Broadcast storm filter function and available options are Off. 1/2. MAC 1/4. 1/8.1/16.
Default mode is Off; the screen in Figure 4-59 appears.
Collision Retry
Forever
Provide Collision Retry Forever function ”Disable” or ”Enable” on Web Smart PoE Switch; If this
function is disabled, when a packet meet a collision, the Web Smart PoE Switch will retry 6 times
before discard the packets. Otherwise, the Web Smart PoE Switch will retry until the packet is
successfully sent. Default mode is Enable and the screen in Figure 4-60 appears.
MAC Table
Auto-Aging
Provide MAC address table aging time setting on Web Smart PoE Switch; available options are
Disable. 150 sec. 300 sec. 600 sec. Default mode is 300 sec and the screen in Figure 4-61 ap-
pears.
MAC Table
Hashing
Provide MAC address table Hashing setting on Web Smart PoE Switch; available options are CRC
Hash and Direct Map. Default mode is CRC Hash and the screen in Figure 4-62 appears.
Web Auto Log-
out Time
Provide Web auto logout time setting on Web Smart PoE Switch; available options are 5 min. 10
min. 20 min. Default mode is 5 min and the screen in Figure 4-63 appears.
Apply button
Press this button for save current Switch configuration on Web Smart PoE Switch.
Table 4-7 Descriptions of the Switch Configuration screen Objects
