13
Object Description
VLAN Configuration Allow user to disable/enable the Port-based
The available options are shown as below:
Disabled: disable VLAN function of the Switch.
PortBased: enable port-based VLAN function of the Switch
The available group ID from 1 to 255.
Return to Main Menu Back to Main Menu screen.
Table 3-6 Descriptions of the VLAN Configuration screen Objects
3.2.6.1 Create a Port-Based VLAN Group
Choose “PortBased” from the VLAN mode of VLAN Configure. The screen in figure 3-9 appears with
message “Press SPACE to select and ENTER to set mode”. Please press “Enter” to continue. The
following screen in figure 3-10 appears with message “Change mode will clear original VLAN setting!
Continue? [Y/N]. Please press “Y” then the following screens in figure 3-11 & 3-12 appears.
Figure 3-9 Create a port-based VLAN Group screen
Figure 3-10 Create a port-based VLAN Group screen
Figure 3-11 Create a port-based VLAN Group screen
