English
15
cover slides up.
3 Insert a disc with the printed side facing up. Press
0 again to close the compartment.
➜ CLOSE is displayed followed by READ as the
CD player scans the contents of a disc, and then
playback starts automatically (if not, press
ÉÅ).
Basic playback controls
To play a disc
● Press ÉÅ to start playback.
➜ The current track number and elapsed
playing time of the track are displayed during
disc playback.
To select a different track
● Press the control knob on the front panel to the
left or right (corresponding to S/T) or
press ¡ / ™ on the remote once or repeatedly
until the desired track number appears in the
display.
● You can also use the Numerical Keypad
(0~9) on the remote to select a track directly.
● To input a number larger than 10, press SHIFT
on the remote once or more to select the first
digit you want and then use the Numerical
Keypad (0~9) to input the second digit.
● If you have selected a track number shortly after
loading a disc or in the PAUSE position, you will
need to press ÉÅ to start playback.
Text display during playback
In CD mode
● Press DISPLAY on the remote control
repeatedly to see the following information.
➜ Track number and elapsed playback time of
current track.
➜ Track number and remaining playback time of
current track.
➜ Track number and total remaining playback
time.
In MP3-CD mode
● Press DISPLAY on the remote control to
display the ID-3 information if available.
Important!
The lens of the CD player should never be
touched.
Loading a disc
This CD player plays Audio Discs including CD
Recordables, CD-Rewritables, MP3 CD and
WMA CD.
● CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.
1 Press SOURCE the system to select CD or
press CD on the remote.
2 Press 0 to open the CD compartment.
➜ OPEN is displayed when the compartment
CD/MP3-CD Operation
pg001-025_MCM710_12-Eng 2007.12.7, 10:4215
