19
1 Turn on the TV and ensure that the TV
progressive scan mode is deactivated (see
the TV user manual).
2 Switch the TV to the correct viewing
channel for this Home Theater System.
3 Press DISC .
4 Press SETUP .
5 Press to select [Video Setup] in the
menu, then press
.
6 Select [Component Video] > [YUV] ,
then press OK .
7 Select [Progressive] > [On] , then press
OK .
A warning message is displayed. »
8 To proceed, select [Ok] and press OK .
The progressive setup is complete. »
Note
If a blank/distorted screen is displayed, wait for •
15 seconds for the auto recover.
If no picture displayed, turn off the progressive
•
scan mode as follows: 1) Press to open
the disc compartment. 2) Press
. 3) Press
AUDIO SYNC .
9 Press SETUP to exit the menu.
10 You can now turn on the progressive scan
mode on the TV.
Note
If distorted picture is displayed, turn off the •
progressive scan feature on this product and
TV.
To select the condition of the room
Select • [Room Acoustics] and press
.
To select this Home Theater System
placement in the room
Select • [Room Placement] and press
.
To select the distance between two speakers
Select • [Speaker Distance] and press
.
To select the distance between the listening
position and the speakers
Select • [Listening Position] and press
.
Turn on Progressive Scan
If the TV supports progressive scan output, you
can connect this Home Theater System and
the TV using component video connection.
(see ‘Connect video cables’ > ‘Connect to the
component video jack’).
RGB
YUV
Video Setup
HDMI Setup
Progressive
Component Video
Closed Caption
TV Display
TV System
Picture Setting
On
Off
Video Setup
HDMI Setup
Progressive
Component Video
Closed Caption
TV Display
TV System
Picture Setting
English
EN
