Display (cont’d) 69
• Selecting a different TV ASPECT
setting is only effective if it is avail-
able on the DVD. Check the DVD
Disc menu or case for details.
•You also can adjust TV ASPECT in
the QUICK SETUP menu that
appears when you first press the
SYSTEM/MENU button.With
QUICK selected, press OK. Press
p
to select TV ASPECT, then press
OK. Press
o
or
p
to choose a
setting, then press OK. Press SYS-
TEM/MENU to remove the menu.
Helpful Hints
5
Press o or p to select an item, then press OK.
● If you selected TV ASPECT, press o or p to
select a setting, then press OK.
Choose 4:3 LETTER BOX if you want to see the
entire, widened picture with black bars at the top and
bottom of the screen.This looks like the picture you
see when watching movies in a theater. This setting is
possible only if the DVD was recorded in the letter-
box or widescreen format.
Choose 4:3 PAN & SCAN for a full height picture,
with both sides trimmed. Some companies refer to
this as reformatting the picture to fit your TV screen
and may call it the regular or normal format.
Choose 16:9 WIDE if a widescreen TV is connected
to the DVD/VCR.
● If you selected ANGLE ICON, press OK
repeatedly to turn ANGLE ICON ON or OFF.The
default setting is ON. Choose ON to see the Angle
icon when multiple camera angles are available during
DVD playback. Details are on page 59. Choose OFF to
disable the Angle icon.
● If you selected AUTO POWER OFF, press
OK repeatedly to set AUTO POWER OFF to ON or
OFF.The default setting is ON. Choose ON if you
want the DVD/VCR to switch to VCR mode automat-
ically if there is no activity at the DVD Player for 35
minutes.
6
Press SYSTEM/MENU to remove the menus.
