A SERVICE OF

logo

PCA-6005 User’s Manual 54
5.4 Windows 9X Drivers Setup Procedure
1. In the "Windows" screen, click on "Start" and select "Settings".
Then click on the "Control Panel" icon to select "System".
Note 1: If you are using Windows 98SE, your system
will find the LAN device "PCI Ethernet Control-
ler". You must first remove this device from your
system, and then restart your computer. Then
you will be ready to install the correct driver by
following the procedure below.
Note 2: The CD-ROM drive is designated as "D"
throughout this section.