26
@0 Operation indicator (OPERATE)
Lights up when the controller's power is turned on.
@1 Link indicator (LINK)
Lights up when communication is established with the
matrix switcher.
@2 Alarm indicator (ALARM)
Lights up when an alarm condition exists.
@3 Monitor indicator (MONITOR)
Lights up when the monitor number appears on the
LED display.
@4 LED Display
Displays the monitor number, camera number, numeric
entry and error status, etc.
@5 Camera indicator (CAMERA)
Lights up when the camera number appears on the
LED display.
@6 Busy indicator (BUSY)
Lights up when the higher-priority operator selects the
camera or monitor you are currently operating.
Operations from the system controller are disabled until
this indicator goes off.
@7 Prohibited indicator (PROHIBITED)
Blinks when an operator attempts to control a monitor
(or camera) that is already used by a higher-priority
operator or the operator has done the prohibited opera-
tion.
@8 Joystick
Use this joystick to manually operate cameras, camera
site accessories and a recorder, or to move the cursor
in SETUP MENU on the active monitor screen.
UP: Up
DOWN: Down
L: Left, rewind*, backward field advance*
R: Right, fast-forward*, forward field advance*
*Available after pressing the RECORDER button while
connecting to a recorder.
@9 Iris buttons (IRIS CLOSE/OPEN)
Close or open the lens iris of cameras equipped with
the specified lens.
Press the CLOSE and OPEN buttons simultaneously.
The lens iris is reset to the factory default setting.
■ WV-CU360C/CU360CJ System Controller (TERMINAL MODE)
A template, on which “For Matrix Switcher (WJ-SX150A)” is written, is provided with a system controller. When using the tem-
plate, place it on the surface of the controller.
In these operating instructions, this template's illustrations are used for descriptions.
● Front View (WV-CU360C) ● Front View (WV-CU360CJ)
