How to Use the Menu Functions
39
MPX
• Stereo
• Mono
• M1
• M2
Selects multiplex sound mode (if available)
[Stereo]: Use this normally
[Mono]: When stereo signal cannot be received
[M1] / [M2]: Available while mono signal is transmitted
•
TV mode only.
SPDIF Selection
• Auto
• PCM
SPDIF: A standard audio transfer file format
Selects the initial setting for digital audio output signal from the DIGITAL
AUDIO OUT terminal
[Auto]: Dolby Digital Plus, Dolby Digital and HE-AAC (48 kHz)
multi-channel are output as Dolby Digital Bitstream.
MPEG is output as PCM.
[PCM]: Digital output signal is fixed to PCM.
•
For Video mode (p. 54) or Network video contents (p. 65)
HDMI1 / 2 / 3 / 4 Input
• Digital
• Analogue
Selects to fit the input signal (p. 77)
[Digital]: HDMI cable connection
[Analogue]: HDMI-DVI adaptor cable connection
•
HDMI input mode only
Reset to Defaults
Press the OK button to reset settings of the present [Mode], [Balance],
[Headphone Volume] and [Surround] in the Sound Menu to the default
Timer
Item Adjustments / Configurations (alternatives)
Off Timer
• Off
• 15 / 30 / 45 / 60 / 75 /
90 minutes
Sets the time until the TV automatically goes into Standby mode
Auto Standby
• Off
• 2 / 4 hours
Sets the time the TV automatically goes into Standby mode when no
operation is performed for the selected times
•
Automatic input switching with the connected equipment affects this
function and time-count will be reset.
•
The notification message will appear 3 minutes before going into Standby mode.
