63
■ Pan/Tilt Control (Auto/Random
Panning)
1. Select the desired monitor and camera.
2. Type 1 using the numeric button, then press the PAN
button to toggle the Auto Panning function on the
selected camera On and Off.
3. Type 2 using the numeric button, then press the PAN
button to toggle the Random Panning function on the
selected camera On and Off.
Note: Moving the Joystick Control will stop Auto or
Random panning.
■ Camera Housing Control
●
Wiper control
1. Select the desired monitor and camera.
2. Type 3 using the numeric button, then press the AUX
button to toggle the power of the Wiper on the selected
camera On and Off.
Note: To prevent premature wearing of the wiper
blades, be sure to turn off the wiper when it is not
needed or before selecting another camera for
viewing.
● Defroster Control
1. Select the desired monitor and camera.
2. Type 4 using the numeric button, then press the AUX
button to toggle the power of the Defroster on the
selected camera On and Off.
● Auxiliary Control
The following function is available only when the WV-RC100
or WV-RC150 Receiver is included in the system.
1. Select the desired monitor and camera.
2. Type 1 using the numeric button, then press the AUX
button to toggle the user Auxiliary Switch 1 of the
Receiver On and Off.
3. Type 2 using the numeric button, then press the AUX
button to toggle the user Auxiliary Switch 2 of the
Receiver On and Off.
