12
VQT2W23
STEP 1: Preparing the speakers
Caution
≥ Do not stand on the base. Be cautious when children are
near.
≥ When carrying speakers, hold the stand and base parts.
Preparation
≥ To prevent damage or scratches, lay down a soft cloth and
perform assembly on it.
≥ For wall mount, refer to page 44.
≥ Keep the screws out of reach of children to prevent
swallowing.
Caution
≥ The main unit and supplied speakers are to be used only as indicated in this setup. Failure to do so may
lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified
service person if damage has occurred or if you experience a sudden change in performance.
≥
Do not attempt to attach these speakers to walls using methods other than those described in this manual.
≥ Do not touch the front netted area of the speakers. Hold by the sides.
[BTT755]
∏ 2 Front speakers
∏ 2 Surround speakers
∏ 4 Bases
(RYK1610-K1)
∏ 8 Screws A
(XTN5+10FFJK)
∏ 4 Stands (with cables)
(RYK1609A-K: RED)
(RYK1609-K: WHITE)
(RYK1609C-K: GREY)
(RYK1609B-K: BLUE)
∏ 1 Speaker cable
(REEX1154-1:
GREEN)
∏ 4 Screws B
(XYN5+J18FJK)
[BTT350]
∏ 5 Speaker cables
(REEX1152A-1: RED)
(REEX1153A-1: WHITE)
(REEX1154-1: GREEN)
(REEX1155-1: GREY)
(REEX1156-1: BLUE)
Assembling the speakers [BTT755]
Back of the base
Tighten
securely.
Insert the wire fully.
r: White
s: Blue line
Push!
Leave about 80 mm
Tighten securely.
Screw A
Screw B
Press into the groove.
Pull the cable
straight along the
line and slide into
the groove.
SCBTT755_350EBGN_VQT2W23.book 12 ページ ２０１０年７月８日 木曜日 午後６時５３分
