n 2
he
, [▲]
off
] or
ing
off
nds.
or
3-A Automatic Security Code Setting
Each time you place the handset on the base unit, the unit
automatically selects one of a million security codes. These codes
help prevent the unauthorized use of your telephone line by another
cordless telephone user.
3
Special Features
Press [FLASH/CALL WAIT] if you hear a call-waiting tone while
talking.
≥The first call is put on hold and you can answer the second call.
≥To return to the first caller, press [FLASH/CALL WAIT] again.
≥Call waiting service cannot be used when a parallel connected
telephone is in use.
≥If this function does not operate properly, consult your telephone
company for details.
3-D For Call Waiting Service Users
Press [](TONE) before entering access numbers which require
tone dialing.
≥The dialing mode changes to tone. You can enter numbers to
access an answering service, electronic banking service, etc.
When you hang up, the mode will return to pulse.
3-C Temporary Tone Dialing
(For Rotary or Pulse Service Users)
3-B Handset Locator
You can locate the handset or page the handset user with beep
tones from the base unit.
1
Press [HANDSET LOCATOR] on the base unit.
≥The Talk/Ringer and Ringer indicators on the handset and the
IN USE indicator on the base unit flash and the handset
beeps for 1 minute.
2
To stop paging, press [HANDSET LOCATOR] again or
press [OFF] on the handset.
4-A Battery
Recharge
When the RECHARGE indicator
flashes or the unit beeps intermittently,
place the handset on the base unit for
about 6 hours to recharge the battery.
≥If you DO NOT recharge the handset
battery for more than 15 minutes, the
RECHARGE indicator will continue to
flash.
While in use (TALK) Up to about 5 hours
Operation Operating time
Up to about 11 daysWhile not in use (Standby)
4
Things You Should Know
Th
≥The battery operating time may vary depending on usage
conditions and ambient temperature.
≥Clean the charge contacts of the handset and the base unit
with a soft, dry cloth once a month. Clean more often if the
unit is subject to grease, dust or high humidity. Otherwise the
battery may not charge properly.
≥If the battery is fully charged, you do not have to place the
handset on the base unit until the RECHARGE indicator flashes.
This will maximize the battery life.
≥The battery cannot be overcharged.
Battery information
After your Panasonic battery is fully charged:
For assistance, please call: 1-800-211-PANA(7262)
ar
N at
ator
ncer
e
RECHARGE
Indicator
4-B Belt Clip
You can hang the handset on your belt or pocket using the included
belt clip.
To attach the belt clip To remove the belt clip
