(Adjust the image brightness)
BRIGHT
: Darken
:
Lighten
[
]
(Adjust the image color depth)
COLOR
: Lighten the depth of color
on the display
:
Deepen the depth of color
on the display
[
]
(Adjust the image tone or tint)
TINT
: Emphasize red in the
color image
: Emphasize green in the
color image
[
]
LCD DIMMER
(SUB-LCD dimmer adjustment)
: Darker
: Brighter
default: HIGH
HIGH
LOW
or
[]] or [[]
a [ENTER]
Menu Setting Value Operations
Darker
Brighter
: Previous menu
: Exit
CAPTURE
(Image Capture)
Up to five images can be imported
from TV, VTR, DVD or Video CD (VCD).
Preparation: Show the image that
you would like to capture on the dis-
play.
Note: Refer to “Display mode
changes” page to display the imported
image on the screen. (a page 26)
Copyright
It is prohibited by copyright laws to
copy, distribute and deliver copyright-
ed materials such as commercial
DVDs/Video CDs or other published or
broadcast material without the
approval of copyright holder except for
personal use.
Note: A captured image may have
some distortion or be otherwise differ-
ent from the original image due to
compression.
to
¡You can store maximum five
images.
¡The existing image is replaced
with a new image when sav-
ing it. Check the right-hand
smaller image on the screen
before saving a new one. If
you would like to keep the
existing image, do not over-
write.
Notes:
¡Do not turn off the unit while
saving an image.
¡To capture an image from TV,
the broadcasting condition
should be fairly good.
IMAGE5IMAGE1
Select Save area
a ,
......
or a
[ENTER] a []] or [[]
a [ENTER] a []] or [[]
Menu Setting Value Operations
w
q
q
w
Direct Image Capture (Only for remote control)
If you would like to capture a picture, press and hold [OSD] (CAPTURE)
for more than 2 seconds.
Subsequent steps are the same as the steps w described above.
