48
1 Press the MENU button U to display the Main menu on
the TV screen.
2 Press the Cursor buttons (3421) R to select “Tuning”
and “Manual” in this order.
3 Press the OK button T to display the list of tuned TV
stations.
4 Press the Cursor buttons
(3421) R to select
the desired TV station.
5 Follow the operations below.
To delete a programme position (Delete):
Press the Channel button (J, red) :.
To insert a blank programme position (Add):
Press the DATE button (r, green) ;.
To move a TV station to another programme position
(Move):
Press the ON button (r, yellow) G,
and then use the Cursor buttons (34) R
to select the new programme position to
which you want to assign the TV station.
6 Press the OK button T to conclude the setting.
7 Press the EXIT button S to exit the On Screen Display.
6 RB3 3
7 SFB3 36
8 SW3 29
9 WDR3 17
10 MDR3 32
16 POS16 83
17
18
19
20
Delete
Add
Move
Indications for Delete, Add
and Move
Hint:
≥ If you have performed Manual Tuning to enter TV stations,
the “– –” indication may appear under “Pos/Name” on the
On Screen Display when programming a ShowView timer
recording.
To Facilitate the Following Operations with
the Instruction Indications on the On
Screen Display
≥ To delete a programme position
≥ To insert a blank programme position
≥ To move a TV station to another programme position
Use the coloured instruction indications displayed below the
list of tuned TV stations and the corresponding coloured
buttons.
If downloading of the setup data has been performed, only
the instruction indication
“Delete” appears.
