Operation
User Manual 17
Customising Buttons
If the term is in parentheses like (Account) in this section, it means a flexible button has been made
into an "Account" button. To perform the following functions, refer to each operation.
CONF (Conference) Button ( ):
Used to establish a three party
conversation.
WAVESEARCH Button:
Used to search the best Cell Station on
idle status. (Wave Search)
TONE Button:
Used to change the dialling mode
temporarily to tone. (Pulse to Tone
Conversion)
EDIT MODE Button:
Used to select a mode to edit on
Directories (except the PBX Extension
Dialling Directory) or in pre-dialling.
FLASH / RCL Button ( ):
Used to disconnect a current call and
make another call. This is not available
for an ISDN line.
PROGRAM Button:
Used to enter the programming mode.
HOLD Button ( ):
Used to place a call on hold.
Flexible CO Button :
Used to assign or edit the Flexible CO
buttons.
Direct Station
Selection
(DSS)
Used to access the extension.
It is also possible to be changed
to the other function button.
Group Direct
Station
Selection
(G-DSS)
Used to access an assigned
incoming group.
Loop-CO
(L-CO)
Used to access an idle outside
line for making outside calls.
Incoming outside calls from any
outside line arrive at this button.
Group-CO
(G-CO)
Used to access an idle outside
line in a specified group for
making outside calls. Incoming
calls from outside lines in the
assigned group arrive at this
button.
Single-CO
(S-CO)
Used to access a specified
outside line for making or
receiving outside calls.
Terminate
Used to disconnect the current
call and originate another call
without hanging up.
One-touch
Dialling
Used to access to a desired
party or system feature.
Message
Used to inform the called party
of a message waiting.
Account
Used to enter an account code.
Toll Change
Used to change the toll
restriction level of the other
extension users temporarily.
ISDN Service
Access
Used to access an ISDN line
service.
Group
Directory
Number (G-DN)
Used to access a specified
incoming group for making or
receiving calls.
Call Park
Used to park or retrieve a call in
a pre-set parking area.
Conference
Used to establish a multiple
conversation.
Save
Used to store a dialled phone
number and redial.
Call
Forwarding/Do
Not Disturb
(FWD/DND)
Used to forward all calls to their
specified destination.
4
5
6
7
F1 F2 F3
