1.5 During a Conversation
1-44 Operations
Transferring a Call to an Outside (CO) Line
(Call Transfer – to Outside (CO) Line)
Allows you to transfer a received call to an external party.
System Programming is required to execute this feature.
PT
• The current call is placed on hold. • The call is transferred.
• If a CPC or reverse signal is sent to an outside (CO) line before the assigned time limit, a
call between two external parties will be disconnected.
• If a call between two external parties is established, an alarm tone is sent to both parties
15 seconds before the assigned time limit (default: 10 minutes). “Hold Recall” is sent to the
transferring extension 50 seconds before time out.
• If you want to return to the held call, press the TRANSFER button or corresponding CO or
INTERCOM button before the destination party answers.
• If you want to join the conversation after transferring the call, press the corresponding CO
button. A conference call is established.
• To change the party where the call is transferred before hanging-up, press the CO button
whose indicator is flashing slowly to retrieve the call, then repeat the Call Transfer
procedure.
• See the Installation Manual, Section 3, “Call Transfer – to Outside (CO) Line”.
PT
PT
PT
PT
PT
!
!
☞