- 128 -
∫ Copying your still pictures to your PC
Card reader function (mass storage)
Still pictures recorded with this unit can be copied to the PC with Explorer
or other programs.
1 Double click the folder that contains the still pictures. ([DCIM] #
[100CDPFP] etc.)
2 Drag and drop the still pictures onto the destination folder (on
the PC’s HDD).
≥ Do not delete the SD card’s folders. Doing so may make the SD card
unusable in this unit.
≥ When data not supported by this unit has been recorded on a PC, it will
not be recognized by this unit.
≥ Always use this unit to format SD cards.
∫ Charging the battery by connecting it to different
devices
If you turn off the unit and connect it to a PC, Panasonic Blu-ray disc
recorder or Panasonic DVD recorder using a USB cable, the battery will
charge.
≥ Insert the USB cable securely all the way. It will not operate properly if
it is not inserted all the way.
≥ Do not use any other USB cables except the supplied one. (Operation
is not guaranteed with any other USB cables.)
≥ Be sure to connect the unit directly to the PC, Blu-ray disc recorder or
DVD recorder.
≥ If you do not intend to use the unit for an extended period, disconnect
the USB cable from the unit for safety.
≥ During charging, the status indicator flashes red.
≥ If the status indicator flashes fast and then goes off or stays off,
charging will not be possible. Charge by using the AC adaptor. (l 12)
≥ It will take 2 or 3 times longer to charge compared to when using the
AC adaptor.
≥ If the status indicator flashes at a particularly fast or slow rate, refer to
page 155.
