Fire alarm system EBL512
________________________________________________________________________
Panasonic Electric Works
2008-08-20 Fire & Security Technology Europe AB Page 3 of 6
• The inter activity function is
using information from one, two
or a larger number of detectors
in the system to provide a more
secure detection of a real fire.
• A family of state of the art
analog detectors gives the c.i.e.
accurate and noise free
information about occurrence of
smoke and/or temperature
changes in the installation.
The analog detector types 33xx (left) received
a design award at the 1998 Hanover Exhibition.
The newer analog detector types 43xx (right)
have an even more attractive & slender design.
A large variety of units can be
connected to the four COM loops:
• Analog detectors
• Conventional detectors
• Intrinsically Safe (IS) detectors
• Water proof heat detectors
• Addressable manual call points
• Addressable short circuit iso-
lators
• Addressable I/O units (inputs /
supervised voltage outputs as
well as relay outputs)
• Addressable sirens / sounder
bases
The EL512 fire alarm system has
a set of functions that meets the
most stringent requirements
relating to fire detection, fire
presentation and measures.
• Service signal is given when a
detector is contaminated to a
certain level.
• A large number of alarm
algorithms is supported by the
system and can be set for each
analog detector individually.
• Alert annunciation. The output
for the alarm transmitter can be
delayed for immediate on site
investigation of a fire alarm.
• Individual detectors, zones,
programmable outputs and
outputs for the alarm transmitter
can be individually disabled.
• Internally and/or externally
controlled time channels. E.g.
one or more alarm points may
be disabled via a time channel.
• Outputs can be programmed in
a very flexible way enabling
control of sirens, fire doors,
extinguishing systems etc.
• External Fire brigade panels
can be connected to each c.i.e.
• Presentation of the actual
system status in a PC or
Pocket-PC via the Web-server
II connected to an intranet
(LAN) or Internet. Remote
control with encrypted and safe
two-way communication. In
case of fire alarm, service signal
etc. e-mails can be sent to the
adequate personnel. Provides
also one-way communication to
an external computer system.
• The Web-server II (the HW)
can be used with the OPC512
SW and connected to a PC with
Panasonic FP OPC Server SW
for a reliable connection to your
industrial applications (clients).
The TLON Network
Up to 30 nodes (i.e. EBL512 c.i.e:s)
can be connected to a TLON
Network. One of the nodes can be
an external PC with a software
driver for a Security Management
system, which gives full control of
and access to all data in all
EBL512 connected to the network.
