5
EN
Preparations for shooting
Basic guide
1
Loading the card.
• Open the card slot cover.
• Slide the card in until it is locked into place.
g “Card basics” (P. 103)
# Cautions
• Turn off the camera before loading or
removing the card.
2
3
1
Card slot
2
Closing the card slot cover.
• Close the cover until you hear a click.
# Cautions
• Be sure the card slot cover is closed before using the camera.
Removing the card
Press the inserted card lightly and it will be ejected.
Pull out the card.
# Cautions
• Do not remove the battery or card while the card
write indicator (P. 31) is displayed.
Eye-Fi Cards
• Use the Eye-Fi card in compliance with the laws and regulations of the country where
the camera is used.
• Remove the Eye-Fi card from the camera or select [Off] for [Eye-Fi] (P. 93) in airplanes
and other locations in which use is prohibited.
• Eye-Fi cards may become hot during use.
• The drain on the battery may increase when Eye-Fi cards are used.
• Camera response may slow when Eye-Fi cards are used.
Inserting and removing cards
