66
E
ADJUSTING THE DATE AND TIME
When adjusting from the camera.
Operate with the lens barrier closed
1 Press the Previous (–) button and the LCD monitor
ON/OFF button at the same time to turn on the monitor.
2 The screen is set to the Date-Print selection mode. Decide
whether to print the date with the Previous (–)/Next (+)
button, then press the OK (shutter) button.
●
Press the Erase mode button to cancel the mode.
●
Date-Print is possible only when printing directly from
the exclusive P-300U printer.
3 Enter the number for the year with the Previous (–)/Next
(+) button, then press the OK (shutter) button. When the
minutes have been entered, press the OK button to
complete the date setting.
◆ Be sure to set the date, regardless of whether or
not the date is to be printed.
◆ The adjusted date is canceled when the camera
is left without batteries for more than 30 minutes.
In such a case, adjust the date again.
Note:
