18
GETTING STARTED (Cont.)
Power on/off
Date/time setting
1 Set the mode dial to the desired position.
2 Open the lens barrier.
●The camera turns on and the lens extends.
●Startup image is displayed on the monitor.
●If the lens does not extend, the lens barrier is not fully open.
3 Partially close the lens barrier to turn the camera off (about halfway
to the lens). Wait until the lens is retracted completely.
●Do not push the lens barrier against the lens.
4 Close the lens barrier all the way.
●The power turns off.
●Shutdown image is displayed on the monitor.
1 Press the (monitor) button.
●The monitor turns on and startup image is displayed.
●If the lens barrier is open, press twice quickly to enter the playback
mode.
2 Press the button again.
●Shutdown image is displayed on the monitor, then the monitor turns off.
Shooting mode
Playback mode
1 Open the lens barrier to turn on the camera and enter the shooting
mode.
2 Press to display Menu.
3 Press í on the arrow pad to select MODE MENU.
4 Press ñ to select SETUP, then press í.
5 Press Ññ to select , then press í.
6 When is selected in green on the screen, press Ññ to select the
date format.
●Select any one of the following formats:
DMY (Day/Month/Year)
MDY (Month/Day/Year)
YMD (Year/Month/Day)
●This step and the following steps show the procedure used when the date
and time settings are set to Y-M-D.
7 Press í to move to the year (Y) setting.
1 C-40ZBasic-E1 01.10.11 9:39 AM Page 18
