Overview
|
Warranty, Regulatory Information, and Specifications 13
Safety Information
Installation Hints
• Install your OKIOFFICE 87 MFP in a dust-free
location away from direct sunlight.
• Do not plug your MFP into a power source shared by
equipment which produces electrical noise (i.e., air
conditioners, etc.).
• Leave electronic adjustments to authorized service
personnel.
• The LINE terminal connects your fax machine to a
standard telephone line. To avoid damage to your
telephone system or to the MFP, do not plug your fax
machine into anything other than a standard RJ-11C
jack.
• Your MFP is intended to be grounded electrically and
is equipped with a three-wire grounded power cord. For
your safety, do not attempt to defeat your power cord’s
grounding plug.
• The power outlet should be located near the equipment
and should be easily accessible.
• The TEL port on the back of the unit is only suitable for
2-wire devices. Not all standard telephones will respond
to incoming ringing when connected to an extension
socket.
• This equipment may not necessarily provide for the
effective hand-over of a call from a telephone
connected to the same line.
Operation and Maintenance
• Use a dry cloth to clean the control panel and the main
body of the unit.
•
Aside from replacing the toner and image drum car-
tridge, do not disassemble or attempt to service this
unit yourself. Refer to a qualified technician for service.
• Disconnect the power cord before trying to remove any
objects that may have fallen into the machine.
• When relocating your MFP, always disconnect the
telephone line before disconnecting the power cord,
then reconnect the power cord first.
