-24-
Call Park - System
This feature allows you to park a call from any line on your telephone not
ust the prime line. The number of calls you can park is limited only by the
number available system park "orbits."
To park a call in system orbit:
1. Press the lit System Park feature key.
2. Do either of the following:
Hang up
Press the New Call softkey to get dial tone
Press a line key to answer a call, retrieve a call or hold, or get dial
tone.
To return to the caller if all the system orbits are busy:
z
Press the Back To Held softkey or CANCEL to return to the caller.
To retrieve a call parked on a system orbit from any extension:
z
While listening to dial tone, dial *17 followed by the park orbit number.
To re-park a call in a system orbit:
z
Press the Park Again softkey. The Park Again softkey only appears
immediately after answering the call.
Call Pickup
To answer a call that is ringing at another station in your Pickup
Group:
1. Lift the handset.
2. Press the Pickup feature key.
To answer a call that is ringing at a station not in your Pickup Group:
1. Lift the handset.
2. Dial *4.
3. Dial the number of the ringing station.
