Building under a continous
worktop / in a kitchen run
N = Niche height (820 - 930 mm)
This machine is specially designed for
installation under a continuous worktop
run in a fitted kitchen.
It is supplied with a cover plate,
instead of a lid, which is necessary
to ensure electrical safety and must
not be removed.
The washing machine must not be
used without the front panel in place.
–
Slides are also available to order for
fitting underneath the machine feet to
protect the floor from damage when
the machine is pushed into position
or taken out for servicing.
– Connections for electricity, water and
drainage should be installed in such
a way that they remain accessible
when the machine is in place.
With niche heights of:
Niche height
(mm)
Accessory
820 None required
from 830 - 840 Fit longer screw feet*
(Set to approx.
40 mm)
from 870 -885 Use one raising kit*
from 915 -930 Use two raising kits*
* accessory available to order
If the kitchen run has a continuous
furniture plinth in place, a gap must
be made for the washing machine.
Installation and connection
50
