To ensure adequate ventilation to the
oven once installed:
- provide a ventilation cut-out in
the housing unit as illustrated.
- do not fit a rear panel into the
housing unit.
- do not fit insulation material
inside the housing unit.
Important:
Remove the protective cork spacers
from the sides of the oven before
installation.
Turn off the mains electricity supply
to the isolator.
^
Connect the mains cable from the
oven to the isolator.
^
Push the oven into the furniture
housing unit as far as the oven trim,
and align it.
^
Open the oven door, and with two
screws secure the oven to the side
walls of the furniture housing unit
through the holes in the oven trim.
^
Reconnect the electricity supply to
the isolator.
The appliance must only be
operated when it has been built in.
Otherwise it poses an electric shock
hazard.
Installing the oven
56
