Setting the machine for water hard
-
ness level 2.7 - 12.6 mmol/l
(15 °d - 70 °d ):
^
Press the f button.
The f indicator light will light up.
An indicator light will come on next to
one of the a - e buttons. This repre
-
sents the water hardness level set in
the machine. See Table 2.
Table 2:
°d
(German
scale)
mmol/l Button
15 - 16 2.7 - 2.8 a
17 - 21 3.0 - 3.7 b
22 - 24 3.9 - 4.3 c
25 - 31 4.5 - 5.6 d
32 - 70 5.7 - 12.6 e
If this value corresponds to your water
hardness level:
^ Switch the dishwasher off using the
"Off" button.
If you would like to change the setting
for a different water hardness level:
^
Press the button which corresponds
to the water hardness level in your
area (see Table 2).
The "Salt" and b indicator lights will flash.
^
Press button f twice.
The "Salt" and f indicator lights will
flash.
^
Switch the dishwasher off using the
"Off" button.
The programmed water hardness level
is now stored in memory.
Checking the programmed water
hardness level
To check which hardness level the ma
-
chine has been set for:
^
Repeat steps 1 to 5.
An indicator light will come on next to
one of the a - e buttons. This repre
-
sents a water hardness level of be
-
tween 0.2 mmol/l and 2.5 mmol/l (1 °d
and 14 °d German scale) set in the ma
-
chine. See Table 1.
^
If there are no indicator lights on
press the f button.
The f indicator light will light up.
An indicator light will come on next to
one of the a - e buttons. This repre-
sents a water hardness level of be-
tween 2.7 mmol/l and 12.6 mmol/l
(15 °d and 70 °d German scale) set in
the machine. See Table 2.
^ Switch the dishwasher off using the
"Off" button.
Before using for the first time
16
