Connector
The connector on the water container
consists of a valve insert, t, and an
O-Ring, u. There is also a connector
on the appliance itself, this however
only consists of the valve insert, t.
The valve insert and/or the O-ring may
need replacing if:
– an unusually large amount of water
collects in the bottom of the
appliance where the water container
connects to the valve.
–
a tone sounds and the symbol for
insufficient water is lit, even though
the water container is full and placed
correctly.
To replace the valve insert t
^
Insert the pointed end of the tool (see
"Accessories") into the valve insert
and pull the valve out.
From the water container, and
from the appliance.
Cleaning and care
46
