To change the O-Ring u on the water
container:
^ Lay the water container on its side.
^ Use a knife or small screwdriver to
get underneath the O-Ring.
^ Pull the old O-Ring off.
^ Slide the new O-Ring on to the
connector. Then lubricate it with the
silicone grease supplied.
Descaling lock
If j 5 appears for a short time in the
display after selecting a program the
appliance needs to be descaled.
The display indicates that the appliance
can be used 5 more times before it will
lock. If the appliance is not descaled
immediately a 4 will appear in the
display the next time the appliance is
used, and so on.
If the display shows a j 0, the
appliance is locked and a tone will
sound.
The machine cannot be used until the
descaling program has been run.
Cleaning and care
48
