241
Controls in detail
Power tilt/sliding sunroof
The tilt/sliding sunroof is opened and
closed electrically. The switch for the
tilt/sliding sunroof is located on the
overhead control panel.
Sunroof switch
1 Push back to slide sunroof open
2 Push forward to slide sunroof closed
3 Push up to raise sunroof at rear
4 Pull down to lower sunroof at rear
With the sunroof closed or tilted open, a
screen can be slid into the roof opening to
guard against sun rays. When sliding the
sunroof open, the screen will also retract.
̈ Switch on the ignition (୴ page 40).
Opening and closing
̈ To open, close, raise, or lower the
tilt/sliding sunroof, move the sunroof
switch to the resistance point in the
required direction of arrows 1 to 4
(
୴ page 241).
̈ Release the sunroof switch when the
tilt/sliding sunroof has reached the de-
sired position.
i
Depending on the current position, the
tilt/sliding sunroof may also open or close when
the air recirculation button : on the control
panel of the climate control (
୴ page 206) or
automatic climate control* (
୴ page 220) is
pressed and held.
