508
Practical hints
Replacing bulbs
̈ Turn cover 1 counterclockwise.
̈ Remove cover 1.
̈ Turn bulb socket 2 counterclockwise.
̈ Pull bulb socket 2 out of the
headlamp housing.
̈ Pull the low beam bulb out of bulb
socket 2.
̈ Insert the new low beam bulb into bulb
socket 2.
̈ Insert bulb socket 2 into the
headlamp housing.
̈ Turn bulb socket 2 clockwise until it
engages.
̈ Place cover 1 on the opening in the
headlamp housing.
̈ Turn cover 1 clockwise until it engag-
es.
Bi-Xenon* low beam/high beam
headlamp
High beam bulb (halogen headlamp)
1 High beam headlamp cover
2 Bulb socket for high beam headlamp
Warning! G
Do not remove the low beam/high beam
cover for the Bi-Xenon* headlamp. Because
of high voltage in Xenon* lamps, it is danger-
ous to replace the bulb or repair the lamp
and its components. We recommend that
you have such work done by a qualified
technician.
164.boo Seite 508 Freitag, 30. März 2007 12:54 12
