302
Practical hints
Replacing bulbs
3 Bulb for turn signal lamp
4 Bulb for tail lamp
5 Bulb for brake lamp
̈ Push defective bulb 3, 4 or 5 into
socket, turn counterclockwise and re-
move.
̈ Insert new bulb in socket, push in and
turn clockwise until it clicks in.
̈ Reinstall lens 2 and screw in securing
screws 1.
Rear fog lamp/Backup lamp
1 Securing screw
2 Lens
̈ Switch off the lights.
̈ Unscrew securing screws 1.
̈ Remove lens 2.
3 Bulb
̈ Push bulb 3 into socket, turn counter-
clockwise and remove.
̈ Insert new bulb in socket, push in and
turn clockwise until it clicks in.
̈ Reinstall lens 2 and screw in securing
screws 1.
i
Do not overtighten securing screws 1.
Otherwise lens 2 could be damaged.
i
Do not overtighten securing screws 1.
Otherwise lens 2 could be damaged.
