
190
Operation
Driving instructions
Crossing obstacles ț Select gear range 1 on the automatic
transmission (
୴ page 114).
ț Check the vehicle clearance before
crossing obstacles.
ț Cross obstacles (e.g. tree stumps or
big rocks) very slowly by aiming one of
the front wheels at the center of the ob-
stacle, and repeat same with the rear
wheel.
ț Special attention is needed when you
cross obstacles on a steep incline.
The vehicle could slide sideways as a
result of its possible slanted position.
Ruts
A number of off-road tracks or other by-
ways have deep ruts which can cause the
undercarriage to come in contact with the
ground.
ț Select gear range 1 on the automatic
transmission (
୴ page 114).
ț Drive next to the ruts rather than
through them if at all possible.
!
Obstacles can damage the vehicle
undercarriage or suspension compo-
nents. If possible use the assistance of
a second person.
After off-road driving or crossing obsta-
cles, inspect vehicle for any damage,
especially vehicle undercarriage and
suspension components. Failure to do
so can adversely affect the vehicle's fu-
ture performance, including increased
chance of an accident.