UK
SAFETY INSTRUCTIONS:
• Read all instructions before using.
• Plug in your appliance using the proper voltage as indicated on
your unit.
• Always unplug the appliance immediately after use.
• Do not use while bathing.
• Keep away from water or humid areas (such as sink filled with
water).
• Do not place in or drop into water or other liquid.
• If the appliance falls into water, unplug it immediately. Do not
reach into the water.
• Do not leave the appliance unattended while it is operating or
plugged in.
• Close supervision is necessary when this appliance is used by
or near children.
• Use this appliance only for its intended use as described in
this manual. Do not use attachments not recommended by the
manufacturer.
• Never operate this appliance when it has a damaged cord
or plug, if it is not working properly, if it has been dropped or
damaged in any manner or dropped into water. Take appliance
to the store, where you bought it for examination and repair or
mechanical adjustment.
• Keep the cord away from hot or heated surfaces. Do not wrap
the cord around the appliance.
• Do not use outdoors.
• Do not place appliance on any surface while it is operating or
while switch is turned on.
• Do not use an extension cord with this appliance.
This appliance adopts the most advanced technology and uses
PTC (Positive Temperature Coefficient) as calorific element. This
gives a stabile temperature without influence of the outer condi-
tions. The ceramic coating provides a better distribution of heat,
creating a smoother, flawless finish to he hair and longer lasting
results. The ceramic surface locks in the hair’s natural oils which
retains colour for longer and reduces static build-up.
USE
The hair should be clean and dry.
Place the curling tongs on an even, heatresistant surface and
connect the power supply on the on/off button. The indicator
lamp is activated and flashes on and off until the selected tempe
-
rature has been reached.
The heat can be adjusted in an interval between 80 and 160 de-
grees Celsius by using the control knob by the on/off button.
This is indicated by figures from 1 to 25, where one is the lowest
possible heat and 25 is max. heat, 160 degrees C.
It takes about 5 minutes before the plates have reached the
selected temperature.
