14
206-4157
Example: PCS150R Main Menu
---------
Main Menu
---------
info System information
video Configure video parameters
setip Setup TCP/IP
tz Timezone setup
pwd Change password
update Update
updser Update via serial link
vpn VPN setup
reset Reset board
exit End the session
Command >
View System Information
1. Log in to the PCS150R as described on the previous page.
2. At the
Command >
prompt, type info and press Enter.
The System Information display identies important information about the PCS150R,
including the unit serial number, hardware ID (rmware version), software versions, MAC
addresses, and IP addresses, for example:
PCS150R Pro:Centric Server v4.5
SN: 001-12410005
Hardware ID: 1.1.0.1
OS version: Linux 2.6.38-zenith+
OS release: #204 Mon May 2 17:21:54 CDT 2011
Eth0 MAC: 00:0C:63:3B:00:55
Eth0 IP: 192.168.10.77
Eth1 MAC: 00:0C:63:3B:00:65
Eth1 IP: n/a
VPN IP: 10.7.0.1
RF config: Mode 3, QAM-B, RF: 6 MHz, 5.36 MSps, ASI: 38.81 Mbps
RF channel: 69
*
Local time: Wed May 18 16:08:12 CDT 2011
It is recommended that you record this information for future reference. If you find it
necessary to call customer service or engineering support, please have this information
available.
* This field only appears if RF output is configured for QAM-B modulation. If RF output is
configured for DVB-C modulation, the display will identify the RF frequency (in KHz).
PCS150R Configuration Options (Cont.)
Note: You can always press
Enter at the
Command >
prompt
to display the Main Menu.
