4
REGISTERING
To use the Magic Remote Control, pair it with
your TV first.
HOW TO USE
How to register the Magic
Remote Control
1 Put batteries into the Magic Remote
Control and turn the TV on.
2 Point the Magic Remote Control at
your TV and press the WHEEL (OK)
on the remote control.
* If the TV fails to register the Magic
Remote Control, try again after
turning the TV off and back on.
How to Re-register the Magic
Remote Control
Press the BACK
and SMART
at
the same time, for five seconds, to
unpair the Magic Remote Control
with your TV.
If you wish to re-register the remote,
press the WHEEL (OK) on the remote
control.
* Shake the Magic Remote Control slightly to the right
and left or press SMART
,
,
buttons to make
the pointer appear on the screen.
* Shake the Magic Remote Control slightly to the right
and left to make the pointer appear on the center of
screen.
* If the pointer has not been used for a certain period of
time, it will disappear.
* The wheel also functions as the ‘OK’ button when
pressed.
* You can change channels and scroll through menus
using the Wheel.
* You can just move your wrist to move the pointer
instead of moving your whole arm.
* The Magic Remote Control depletes batteries faster
than a normal remote due to the additional features.
You may wish to use rechargeable batteries.
* If the pointer loses its calibration, set down the remote
for a couple of minutes to let it recalibrate.
