A SERVICE OF

logo

Open as PDF
next previous
18
When decreasing the length [A], total thickness of clutch plates, use the kit spring retainers
(provided as optional production parts) to keep the preload of clutch springs according to
the table below.
Length [A] Part Number Height [B]
53.1 ~ 53.6 mm 13092-1041 6 mm (standard)
52.6 ~ 53.0 mm 39108-0004 5 mm
52.0 ~ 52.5 mm 39108-0006 4.5 mm
※If you have clutch slip during acceleration use shorter spring retainers by one size to
increase preload of clutch springs.
The original springs and retainers can be used if the length [A] is between 52.8 ~ 53.6
mm.
For precise setting the measurement of the effective stroke of clutch spring plate is
recommended.
• Remove oil from clutch plates.
• Hold an extra drive shaft in a vise and install the following clutch parts on the shaft.