103
Ⅵ Receive
For specifying settings related to receiving of audio sound sent from
VN-X35U.
A Receive For specifying whether to receive audio sound. Select AOnB to receive
audio sound.
B Stream For selecting the stream format of the received audio sound.
When AHTTPBis selected, lost packets are recovered via resending. When
AMulticastBis selected, you can monitor the audio sound of VN-X35U using
a multiple number of client PCs. During receiving via multicast., start
multicast sending on the [Streaming] page.
Note:
●When Built-in Viewer is launched with AMulticastB specified, a Windows
firewall warning may appear. In this case, select AunblockB and proceed.
● If AblockB is selected, the Windows firewall will block the multicast
stream and playback of multicast by the viewer will fail.
C Multicast IP
Address
You can change the multicast IP address.
The default address is 225.0.3.1.
Specify the same value as the parameter that is set on the [Streaming]
page of VN-X35U.
D Multicast Port You can change the multicast port number.
The default port number setting is 39152.
Specify the same value as the parameter that is set on the [Streaming]
page of VN-X35U.
Ⅵ Speech
For specifying settings for sending audio sound to VN-X35U from the
computer.
A Destination
Port
You can change the destination port for sending audio sound to VN-X35U
from the computer. The default port number setting is 49298
Ⅵ Common
For specifying the HTTP port settings
A HTTP Port For changing the port number during access to VN-X35U from the client PC
via HTTP.
The default port number is 80.
Specify the same value as the parameter that is set on the Protocol.
