14
Using the TV’s menus
VIDEO-2 SET
Set the VIDEO-2 SET correctly according
to the video signal input from the external
device connected to the VIDEO-2
terminal. If this setting is incorrect,
images will not be displayed.
1 Press MENU T to display the
“MENU 2” menu, then select
“VIDEO-2 SET”.
MENU 2
AUTO SHUTOFF ON
CHILD LOCK ON
BLUE BACK ON
VIDEO-2 SET COMPONENT
SELECT BY EXIT BY
OPERATE BY -+
DISPLAY
2 Set the VIDEO-2 SET according to
the video signal input from the
VIDEO-2 terminal.
If a normal video signal (composite
video signal) is input:
Press the CHANNEL m or the
MENU
/
buttons to select “VIDEO”.
If a component video signal (Y/C
B/CR
signals) is input:
Press the CHANNEL m or the
MENU
/
buttons to select
“COMPONENT”.
AUTO CH PRESET
You can automatically preset all TV
channels that can be received by your TV
to channels.
1 Press MENU T to display the
“MENU 3” menu, then select
“AUTO CH PRESET”.
MENU 3
AUTO CH PRESET
SELECT BY EXIT BY
OPERATE BY -+
DISPLAY
MTS STEREO SAP MONO
LANGUAGE ENGLISH
CHANNEL SKIP
SETUP TOUR
ON AIR
2 Press CHANNEL M or MENU
/
.
The sub-menu is displayed.
TUNER MODE:CABLE AIR
START
SELECT BY EXIT BY
OPERATE BY -+
DISPLAY
3 Press CHANNEL M or MENU
/
to select “CABLE” or “AIR” .
4 Press MENU T to select “START”.
5 Press CHANNEL M or MENU
/
to start the AUTO CH PRESET
function.
“>>>ON SEARCH” is displayed on
the screen.
When all the TV channels that can be
received on your TV have been preset,
the display goes out and the AUTO CH
PRESET function operation is
completed.
To stop the AUTO CH PRESET:
Press the CHANNEL m or the
MENU
/
buttons.
GGT0018-21VT11-E5 30/6/03, 4:17 pm14
