16
Insignia NS-DPFC01 Clock Radio with LCD Photo Viewer
www.insigniaproducts.com
2 Repeatedly press SLEEP to decrease the sleep timer in 10 minute
increments.
3 To cancel the sleep function, repeatedly press SLEEP until “00” shows
on the display.
Adjusting the backlight
To set the backlight level:
1 Make sure the power is connected.
2 Press SNOOZE/DIMMER to set the display backlight to a
comfortable level, except when the alarm is on. Your choices include
High, Middle, or Low.
Displaying photos
You can view photos on your clock radio from three sources:
1. A compatible USB device connected to the USB port.
2. A memory card (SD/MMC/MS/XD) plugged into the memory card slot
on the side of your clock radio.
3. The clock radio’s internal memory (approximately 128 MB).
Connecting your clock radio to your computer
Photos can be transferred to your clock radio using your personal
computer.To connect to a computer you need a USB cable (provided).
To connect your clock radio to your computer:
1 Plug in your clock radio (refer to “Plugging your clock radio”).
2 Plug the small end of the USB cable into the USB cable port on the
clock radio, then plug the large USB connector into a USB port on your
computer.
Note
Your clock radio may not work with all versions of Microsoft
Windows.
NS-DPFC01 09-0621_MAN_ENG_V2.fm Page 16 Friday, July 24, 2009 12:14 PM
