A SERVICE OF

logo

ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Adjustable Wrench and Allen
Wrench
NOTE: It is strongly recommended this machine to be assembled by two or
more people to avoid possible injury.
STEP 1 (See Diagram 1)
A.) Attach the Main Frame (#1) to the Rear Stabilizer (#5). Secure it with two M10 x
3 ½” Carriage Bolts (#6), ¾” Washers (#3) and M10 Aircraft Nuts (#2).
B.) Attach the Main Frame (#1) to the Front Stabilizer (#32). Secure it with two M10 x
3 ½” Carriage Bolts (#6), ¾” Washers (#3) and M10 Aircraft Nuts (#2).
DIAGRAM 1
4