A SERVICE OF

logo

English-48
MAINTENANCE
1. Attach the unit to the equipment frames outer
hooks.
2. Pull out the catch (A) and loosen the safety catch
by pushing its handle (D) back.
3. Raise the unit by pulling up the mechanical lifting
lever, located on the drivers right side.
4. Push the unit in so that the interior plugs (B) touch
the bottom of the equipment frames grooves.
5. Hook in the height adjustment struts (E) rear
fastener:
Move the cutting height lever to the forward
position. Loosen the strut by pulling the frames
forward section up or down.
8009-024
8009-167
A
D
8009-018
8009-168
E
WARNING!
Watch your ngers. Do not turn the
blades or the belt.