2 Press the REC/IRT button twice to indicate the recording time on the display.
• You may increase the recording time by30 minutes each time you press the REC/IRT button.
• While you are recording, the remaining recording time is shown on the VCR display.
• At the end of your recording, the display will read "0:00", recording will stop automatically, and the
VCR will turn itself off.
Instant Recording Illustretion.
To stop recording while in the IRT mode:
1 Press the STOP button within 10 seconds.
• This can be done either on the VCR or with the remote control.
• Setting the VCR to record later
With the delayed recording feature, you can set this VCR so that it automatically turns on and records programs
whenever you like - without your being around! You can record a program one time only, or you can automatically
record a show every weekday or every week at the same time. You can preset as many as 8 timed recordings at
once.
Recording iseven easier when have set up your channels for the VCR Plus+ system. Learn the basics of delayed
recording in this section. Then read about the VCR Plus+ system beginning on page 47.
• Before you begin
Assemble the information you need for timed recording:
• Be sure that the clock is set to the correct time
• Date and day of the program
• Starting time
• Ending time
• Channel to be recorded
• Blank or erasable videocassette (safety tab intact)
46
