22
Multifunctional settings
Multifunctional settings
Using the menu function
This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP,
SCREEN, OPTION and EASY MENU. Each of these menus is operated using the
same methods. The basic operations of these menus are as follows.
1.
Press the MENU button on the remote control or one of the
cursor buttons on the projector.
The advanced MENU or EASY MENU will appear.
2.
Use the cursor buttons ▲/▼ to select a menu.
At the EASY MENU
If you want to change it to the advanced MENU, select the
"Go to Advanced Menu".
At the advanced MENU
Select a menu of PICTURE, IMAGE, INPUT, SETUP,
SCREEN or OPTION.
If you want to change it to the EASY MENU, select the
EASY MENU.
3.
Then press the cursor button ► on the projector or remote
control, or the ENTER button on the remote control to
progress.
The display of the selected menu will be active.
4.
Use the cursor buttons ▲/▼ to select an item to operate.
Then press the cursor button ► on the projector or remote control, or the
ENTER button on the remote control to progress.
The operation menu of the selected item will appear.
5.
Use the cursor buttons▲/▼ to operate the item.
When you want to reset the operation, press the RESET button on the remote
control during the operation. Note that items whose functions are performed
simultaneously with operation (ex. LANGUAGE, H PHASE etc.) aren't reset.
When you want to return to the previous display, press the cursor button ◄ on
the projector or remote control, or the ESC button on the remote control.
6.
Press the MENU button on the remote control again to close the menu and
complete this operation.
Even if you don't do anything, the dialog will automatically disappear after about
10 seconds.
