Item Description
KEYSTONE
Adjust the Keystone (Vertical) Distortion:
Upper in the data Lower in the data
• The adjustable range of this function will vary with the type of input signal. At
some signals, this function may not work well.
• When the V:INVERT or the H&V:INVERT is selected under the MIRROR item, if
the projector screen is inclined or if the projector is angled downward, this
function may not work correctly.
• When the WIDE is selected under the ASPECT item of the MAIN menu, this
adjustment is ignored.
• When the zoom adjustment is set to the TELE side, this correction may be
excessive. This function should be used with zoom set to WIDE whenever
possible.
BRIGHT
Adjust Brightness: Light Dark
CONTRAST
Adjust Contrast: Strong Weak
ASPECT
Select an Aspect Ratio
At a RGB input:
4:3 16:9 15:9 32:15
• At a RGB input, selecting an aspect ratio may display the message “SYNC IS
OUT OF RANGE”. In this case, please select one of other aspect ratios.
At a VIDEO input, a S-VIDEO input or a COMPONENT VIDEO input:
4:3 16:9 WIDE ZOOM
• At a COMPONENT VIDEO input of 16:9 Hi-Vision of 1125i(1035i/1080i)/750p,
only 16:9 can be selected.
• When the 4:3 is selected under the SCREEN TYPE item of the OPTION menu,
WIDE and ZOOM cannot be selected.
WHISPER
Select the Whisper Mode:
NORMAL WHISPER
• When the WHISPER is selected, acoustic noise and screen brightness are
reduced.
MIRROR
Select a Mirror Status:
NORMAL H:INVERT V:INVERT H&V:INVERT
LANGUAGE
Select a Menu Language:
ENGLISH FRANÇAIS DEUTSCH ESPAÑOL
ITALIANO NORSK NEDERLANDS
PORTUGUÊS
SVENSKA SUOMI POLSKI
RESET
Reset the MAIN Menu Items:
Selecting the EXECUTE performs this function.
EXECUTE CANCEL
• The items of the MAIN menu are collectively returned to the initial setting.
Note that the items WHISPER and LANGUAGE are not reset.
Multifunctional Settings (continued)
