A SERVICE OF

logo

Open as PDF
next previous
Remove the secondary hard drive:
1. Position the computer with the front toward you.
2. Loosen the two Phillips M2.5x10.5 captive screws (1) that secure the hard drive to the computer.
3. Loosen the Phillips M2.5x10.5 captive screw (2) that secures the hard drive to the computer.
4. Grasp the tab and slide the hard drive (3) to the right.
5. Lift the hard drive up (4) to remove it from the hard drive bay.
6. If it is necessary to replace the hard drive bracket, follow these steps:
a. Remove the four Phillips M3.0x3.0 screws (1) that secure the hard drive bracket to the hard
drive.
Component replacement procedures 57