A SERVICE OF

logo

Expanding the OmniBook
Installing a Hard Disk Drive
58 User’s Handbook
Installing a Hard Disk Drive
To replace the hard disk drive
You’ll need a small Phillips screwdriver for this procedure.
1. Unplug the ac adapter, if present, and remove the battery.
2. Turn the unit bottom side up and remove the hard drive screw.
3. Pull out the hard drive by its plastic tab.
Important
If you are installing a new hard disk drive, you should create a Hibernate partition on the
drive before loading any software. See “To recover the factory installation of Windows”
on page 87. The online Reference Guide shows how to install the holder on a new hard
disk drive.