Using the Keyboard 25
Customizing the keyboard buttons
You can customize some of the special buttons on the keyboard (select models only) to
open different programs or files or go to favorite Web sites.
If you cannot customize the keyboard buttons using the following procedure, see the
documentation that came with the keyboard.
1 Click the Windows Start Button on the taskbar.
2 Click Control Panel.
3 Click Hardware and Sound, if it is present.
4 Click Keyboard.
5 Click the Buttons tab, and then double-click the button that you want to change.
6 For the button configuration, click the Down arrow to the right of the list and choose
the button capability, such as Complex remote page with label or Simple
local file with label.
7 Enter a display label and the address information. For a Web page, enter the URL.
8 Click OK.
9 On the Buttons tab, click Apply.
10 Repeat steps 5 through 9 for each button that you want to customize.
11 Click OK to finish.
Or
– +
Volume Volume knob controls speaker volume: Turn clockwise to
increase speaker volume and counterclockwise to decrease
volume.
NOTE: The Volume knob can continue to be turned, even
after maximum volume has been reached.
Volume Up and Down buttons control speaker volume:
Press the Volume Up button to increase volume and the
Volume Down button to decrease volume.
Or
Mute Turns speaker sound on and off.
NOTE: You can click the Speed tab to adjust the character repeat delay speed or the
cursor blink rate. You can also click the Hardware tab, and then click the
Properties button to view keyboard information.
NOTE: Click the Restore Defaults button on the Buttons tab to restore all of the buttons
to the factory settings.
Icon Label Description (continued)
